42" AJ SLICK updated version
Now with new color schemes, carbon fiber landing gear mount, and one-piece heavy-duty carbon landing gear.
Based on the new, full-size aerobatic Slick 360/540 Andrew Jesky's 42" AJ Slick raises the bar for parkflyer precision/3D aircraft. Featuring all of the 3DHobbyShop construction innovations, like a pre-assembled heavy-duty motor box with pre-drilled and pre-nutted firewall, heavy-duty carbon wing spar, thumb-screw wing attachment, aluminum wheel axles and collars, latching canopy hatch with pre-installed canopy - the 42" Slick ARF will get you in the air quickly and easily. Removable wings make for easy transport while the stiff carbon wing tube withstands the very high G-loading of extreme aerobatics.
Andrew gave the Slick his personal airfoil design, which provides no-rock harrier performance AND great precision in snapping maneuvers. Stability, stability, stability is what the design provides, locking into knife-edge flight without any wandering and handling crosswind conditions better than you'll believe. All the much-loved characteristics of the 51", 71", and 89" AJ Slicks are here in this 42" version.
Flying Videos:
 Download the 42" Slick Manual Here (Right-Click > 'Save As')
Specs:
Wingspan: 42"
Length: 38"
Weight: 30-36oz
Wing Area: 375 sq in
Required Equipment
Motors: Omega 103g1030KV w/12x6 prop Recommended
Hacker A30-16M w/11x5.5 prop
Omega 72g1100KV w/ 11x5.5 prop
ESC:
Hacker X40
Airboss 45
Castle Ice Lite 50
Battery:
3S Lipo 1500-2100mah
Servos:
Hitec HS-65MG Recommended
Hitec HS-65HB
Hitec HS-45HB
Servo extensions:
1 x 12" servo extensions
1 x 6" servo extension
2 x 4" servo extensions
Servo notes:
The HS-45HB is only for use with very light setups such as the 72g Omega or 480-sized outrunners. Being a very light servo, it requires perfect installation for best performance. The HS-65MG is a heavier, but much more rugged servo that is more forgiving of less-than-perfect installation.
Note: that the servo openings on the slick are sized to use either of these servos, so they will need slight trimming for perfect fit.
|
|
